級別

B基本
M中
H高
A期望）

An effective, accurate HACCP Plan must be in place. The HACCP Plan must be developed using Codex Alimentarius HACCP principles with reference to relevant legislation, Tesco Codes of Practice and industry guidance.
一份有效、準確的HACCP 計劃必須已經就緒。必須采用Codex Alimentarius HACCP 原則并參考相關法規、樂購指導規范及行業指南制定HACCP 計劃。

The HACCP Plan must include a detailed scope referencing elements of sections 1.1-1.5, 1.10, 1.16, 1.17.
HACCP 計劃必須包括參考1.1-1.5, 1.10, 1.16, 1.17 節內容的詳細范圍。

The HACCP system must be developed by a multi-disciplinary team which must have product specific knowledge and expertise. If internal expertise is not available, expert advice may be obtained from other sources. The operation of the HACCP system must remain the responsibility of the site.
應由跨部門團隊建立HACCP 體系，此團隊必須具備具體產品的相關知識和專門技能。如果不能獲得內部的專業知識，可從其他來源獲取專家建議。HACCP 體系的運行必須是工廠的職責。

At least one member of the team must have completed a recognised qualification (minimum Intermediate HACCP or equivalent) and the other members must be suitably trained. Intermediate level training would consist of a 2 day training course with a mandatory examination at the end. A programme of refresher training to ensure up to date knowledge, must be considered.
團隊中至少有一名成員已經完成了公認的資格認定(最低為中級HACCP 或相當水平) ，其他成員也必須接受過適當?shù)呐嘤?xùn)。中級水平培訓包括2 天的培訓課程及課程結束時必須參加的考試。必須考慮實施更新培訓計劃，確保知識的更新。

All environmental and operational controls that are necessary to produce of safe and legal food products must be in place. These cover good manufacturing practices throughout the site. They may include (not an exhaustive list) e.g.:
必須具備生產安全合法食品必需的所有環境和操作控制措施。這些措施包括整個工廠內的良好生產規范，可包括（但不限于），這些措施包括整個工廠內的良好生產規范，可包括（但不限于），如：
• Personal Hygiene 個人衛生
• Staff Training 員工培訓
• Pest Control 蟲害控制
• Cleaning procedures 清潔程序
• Glass/hard plastic control 玻璃/硬塑料控制
• Waste control 廢棄物控制
• Maintenance Procedures 維護程序

The control measures and monitoring procedures for the pre-requisite programme must be clearly identified and documented.
前提方案的控制措施和監控程序需清楚地識別并文件化。

A flow diagram covering all steps in the operation including rework,water where used and waste must be constructed. This may be generic but it is critical that all process steps are included and identified by product.
繪制一份流程圖，此圖應涵蓋操作中的所有步驟，包括返工，用水步驟和廢棄物排放點?？蔀橥ㄓ玫膱D，但關鍵是應包括所有過程步驟，并根據產品加以識別。

The diagram must be verified within the production area. 此圖必須在生產區域內得到驗證。

All potential hazards that may be reasonably expected to occur for each process step and product must be identified.
在各過程步驟和產品中，合理預期可能發生的所有潛在危害必須識別出來。

Hazards identified must be specific to the process step, generic descriptions such as ‘foreign body’ and ‘micro-organisms’ are not sufficient.
識別的危害必須在此過程步驟進行詳細的描述，籠統的描述（如“外來異物”和“微生物”）是不充分的。

The HACCP team must conduct a hazard analysis to identify hazards which need to be prevented, eliminated or reduced to acceptable levels.
HACCP 小組必須進行危害分析，以識別需要預防、消除或降低到可接受水平的危害。

The hazard analysis must include:危害分析必須包括：
• Likely occurrence and severity 發生的可能性和嚴重程度
• Survival or multiplication of micro-organisms 微生物的存活或繁殖
• Presence or production of toxins, chemicals or foreign bodies and allergens 是否存在或產生毒素、化學物質或外來異物和過敏物質
• Potential for adulteration/deliberate contamination 摻雜/有意污染的可能性

The HACCP team must assess whether an existing pre-requisite adequately controls the hazard identified.
HACCP 小組必須評估既有的前提方案是否可充分控制已識別的危害。

The HACCP team must also consider what control measures (if any exist) for the remaining hazards can be applied to prevent, eliminate or reduce the risk to acceptable levels.
隨后，此 HACCP 小組必須考慮，對于其余危害，目前有哪些（如果有）控制措施可用于運用，以防止、消除風險或?qū)L(fēng)險降低到可接受水平。

If no control measures have been identified the product /process must be modified so a control measure can be applied
如果沒有確定的控制措施，必須修改產品/過程，以便能夠采取控制措施。

Critical limits must be defined and validated to ensure that the product is safe. The process must be capable of operating consistently within
the defined limits.
必須定義關鍵限值，并確認以確保產品是安全的。加工過程必須能夠在規定限值內持續地運行。

Critical limits must be measurable and justification for their use must be documented.
關鍵限值必須可測量，應用關鍵限值的理由應形成文件。

Monitoring procedures must be established for each CCP to ensure compliance with the critical limits.
必須針對每個CCP 建立監控程序，確保關鍵限值的符合性。

The monitoring system must be able to demonstrate control and detect loss of control of CCPs.
監控系統必須能夠證明CCP 處于受控，并能發現CCPs 的失控。

The precision limits and tolerances of the monitoring equipment must be considered when defining limits e.g. tolerance of temperature probes.
定義限值時，必須考慮監控設備的精密度限值和公差，如溫度傳感器的公差。

Monitoring procedures must contain details on how the measurements are taken and the frequency.
監控程序必須包括如何進行檢測以及檢測頻率的具體內容。

Monitoring records must be signed by the person doing the check and then verified by an authorised person.
監控記錄必須由實施檢查的人員簽名，隨后由獲得授權的人員驗證。

The corrective actions to be taken when a CCP deviates from critical limits must be detailed and documented by the HACCP team.
必須具體說明CCP 偏離關鍵限值時采取的糾正性措施，并由HACCP 小組在文件中詳細描述。

The corrective actions must ensure that the CCP has been brought under control and any material that may have been produced whilst the CCP was not in control must be identified, isolated and a full risk assessment completed.
糾正措施必須確保CCP 回到受控狀態，對CCP 未受控期間可能產生的任何產品/物料必須進行識別和隔離，并對其進行全面風險評估。

Product and or materials must be disposed of if the safety of the product is in doubt.
如果對產品的安全性不確定，必須對產品或物料進行處理。

If the risk assessment deems the product to be safe, it must not be supplied to Tesco without first discussing the issue and submitting documented evidence to support product safety with the relevant Tesco TM. (see also 11.3)
如果風險評估認為產品是安全的，在沒有首先與相關Tesco 的技術經理討論該事項并提交文件性的證明時，產品不得提供給Tesco。（也可參見11.3）

The HACCP must be reviewed at the earliest opportunity following accepted deviation from the defined critical limits. (see also 1.18)
當定的關鍵限值出現可以接受的偏離時，應第一時間對HACCP進行評審。（也可參見1.18）

Personnel in the factory who monitor CCPs must have an understanding of HACCP and have specific training against the latest version of the relevant monitoring procedure.
工廠內監控CCP 的人員必須了解HACCP，并接受專門的針對相關監控程序的最新版本的培訓。

All production personnel should have a basic understanding of HACCP and how it relates to the area they work in.
所有生產人員都應對HACCP 以及HACCP 與其工作區域之間的聯系有基本的了解。

The operation of the HACCP plan must be verified to confirm that it is effective.
必須對HACCP 計劃的運行進行驗證，以確定其是有效的。
This may include:驗證可包括：
• Internal audits內部審核
• Review of customer complaints對客戶投訴的評審
• Review of hazard measurements e.g. microbiological results.對危害檢測結果的評審，如微生物學檢測結果

The HACCP plan is verified by a 3rd party with specialist knowledge of food microbiology, food chemistry and food processing
technologies if applicable e.g. thermal processing.
如適用，HACCP 計劃由具備食品微生物學、食品化學和食品加工技術專業知識的第三方驗證，例如熱加工。

The HACCP plan must be reviewed at a pre-determined frequency (minimum annually) or prior to changes of product/process which may affect product safety.
HACCP 計劃必須按照預先規定的頻率（最少每年一次）進行評審，或在發生可能影響產品安全性的產品/過程改變前進行評審，包括以下方面的改變：

This may include changes in (not an exhaustive list):
這包括以下方面的變化（不是一個詳細的清單）：
• Process steps 過程步驟
• Supply or specification of raw materials 原料的供應或規格
• Ingredients/recipe 配料/配方
• Packaging, storage or distribution etc. 包裝，倉儲或配送
• Introduction of new or modification to existing equipment 新設備的引進或者現有設備的變更
• Change in factory layout or product flow 工廠布局或者產品物流的變化